Stock number | 1039-8977 |
Machine Category | Bar Automatic Lathe - Multi Spindle |
Make | INDEX |
Type | MS 52 C |
Year | 2007 |
Control | 840 D Powerline Siemens |
Storage location | Deutschland |
Country of origin | Germany |
Delivery time | to be agreed |
Quotation | ex site |
Other information | CNC - Bar Automatic Lathe Multi Spindle INDEX - MS 52 C - incl. bar loading - WTO revolver with Capto C5 (incl. 2x triple shots) - Rear processing - Tool drive - Y axis - C axis - Synchronous spindle - Polygon turning Jaw chuck Röhm on 6.2 Plier holders HSP Nordmann surveillance system Artis (2x4 channels) IEMCA SIR MS52 with tapping unit Fire extinguishing system Kraft&Baur fire damper VPN remote diagnosis UNIMAG interface Knoll chip conveyor + coolant unit KSS through the synchronous unit Hydraulic ejector Material stop control NC option double transmit NC option Scara Transformation NC option synchronous spindle polygon turning Clamping devices / tools NOT included! Incl. 4 basic holders on the back (Capto C4) |
number of spindles | 6 |
spindle passage | max. 52mm |
turning length | max. ca. 180mm |
control | 840 D PowerlineSiemens |
Workingspindle: | |
number of spindles | 6pos. |
max. bar capacity | 52mm |
Max. rpm | 5.000min/-1 |
power capacity | 29kW |
max. Torque | 138Nm |
Swivable-Synchronous-Spindle: | |
Max. rpm | 5.000min/-1 |
power capacity | 5,7 / 7,2kW |
max. Torque | 18 / 23Nm |
Swivel Angle Synchronous-Spindle | 132° |
slide travel Z-axis | 190mm |
Backside processing | 3pos. |
Tool holder 1: | |
Number of tool stations | 12pos. |
travel -x axis | 100mm |
travel -z axis | 180mm |
y-axis | 58 (+/- 29)mm |
Tool holder 2: | |
Backside processing | 3pos. |
tool taper | Capto C4 |
travel -x axis | 83mm |
total power requirement | 111kVA |
weight of the machine ca. | 10,5t |
dimensions of the machine ca. | 10,0 x 5,0 x 3,5m |
Documents | |
Coolantsystem | |
high pressure coolant | 35 (80) bar |
Y-axis | 2x |
hydraulic system | |
Tool drive mechanisum | |
Chip conveyor | |
Signal-Light | |
breakage control | |
bar feeder interface | |
bar feeder | IEMCA SIR MS52P |
Three Jaw Chuck | |
collet chuck | Hainbuch SR52 |
C-axis |