Stock number | 1039-9053 |
Machine Category | CNC Turning- and Milling Center |
Make | MORI SEIKI |
Type | NZ 1500 T3Y3 |
Year | 2008 |
Control | MSX 701 MAPPS III |
Storage location | D-59302 Oelde |
Country of origin | Japan |
Delivery time | immediately |
Quotation | ex site |
Other information | CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device |
turning diameter | max. 320mm |
turning length | 810mm |
control | MSX 701 MAPPS III |
standard turning dia. | 200mm |
Main spindle: | |
Number of revolutions | max. 6.000min/-1 |
power capacity - main spindel | 22 / 18,5kW |
Bar feed | max. 52mm |
spindle bore | 61mm |
C-Axis | 0,001° |
Subspindel: | |
Number of revolutions | max. 6.000min/-1 |
power capacity - Sub spindle | 22 / 18,5kW |
Bar feed | max. 52mm |
spindle bore | 61mm |
C-Axis | 0,001° |
Turret 1 + 3: | |
number of toolpositions | je 16pos. |
Number of driven toolspositions | je 16pos. |
Spindle speed - driven tools | max. 6.000min -1 |
power capacity - driven tools | 7,5 / 5,5kW |
Y - Axis | 110 (+65 / -45)mm |
Turret 2: | |
number of toolpositions | 16pos. |
Number of driven toolspositions | 16pos. |
Spindle speed - driven tools | max. 6.000min -1 |
power capacity - driven tools | 7,5 / 5,5kW |
Y - Axis | 110 (+45 / -65)mm |
axis stroke: | |
x-travel | 1-3: 210mm |
y-travel | 1-3: 110mm |
z-travel | 1+3: 300 / 2: 810mm |
total power requirement | 90kVA |
weight of the machine ca. | 9,3t |
dimensions of the machine ca. | 4,5 x 3,0 x 2,5m |
Documents | |
Chip conveyor | |
Coolantsystem | |
bar feeder interface | |
parts catcher | |
triple signal light | |
C-axis | 2x |
Y-axis | 3x |
Subspindle | |
Turret | 3x |
collet chuck | |
bar feeder | LNS Quick Load Servo III |