Stock number | 1039-9064 |
Machine Category | CNC Turning- and Milling Center |
Make | MORI SEIKI |
Type | NLX 2500 SY / 1250 |
Year | 2011 |
Control | M 730 BM MAPPS IV |
Storage location | D-59302 Oelde |
Country of origin | Japan |
Delivery time | to be agreed |
Quotation | ex site |
Other information | CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle - only 9.600 Spindle hours (May 2023) |
turning diameter | max. 356mm |
turning length | 1.255mm |
control | M 730 BM MAPPS IV |
greates pass round over bed | 920mm |
Swing dia. over traverse guideway | 742mm |
distance between spindles | 1.511mm |
Main spindle: | |
turning speed range - main spindle | 4.000min/-1 |
power capacity - main spindel | 18,5 / 15kW |
spindle nose | JIS A-8 |
spindle bore | 91mm |
max. bar capacity | 80mm |
Subspindel: | |
Spindle speed range subspindle | 6.000min/-1 |
power capacity - Sub spindle | 11 / 7,5kW |
spindle bore | 43mm |
axis stroke: | |
x-travel | 260mm |
z-travel | 1.345mm |
Y - Axis | +/-50mm |
rapid traverse ( X / Y / Z ) | 30 / 10 / 30m/min |
turret: | |
number of toolpositions | 12pos. |
Schank height for square tool | 25mm |
Drill shank diameter | 50mm |
turret change time | 0,27sec. |
Driven Tool Positions: | |
Spindle speed - driven tools | max. 6.000min -1 |
power capacity - driven tools | 5,5 / 3,7kW |
total power requirement | 43kVA |
weight of the machine ca. | 7,8t |
dimensions of the machine ca. | 6,0 x 3,0 x 2,3m |
Documents | |
Chip conveyor | |
Coolantsystem | |
high pressure coolant | 5 bar |
hydraulic system | |
driven tool positions | |
work light | |
parts catcher | |
triple signal light | |
part counter | |
bar feeder interface | |
Three Jaw Chuck | Kitagawa BB 210 / 250mm |
Three Jaw Chuck | Kitagawa B 206 / 160mm |