MORI SEIKI - NZ 2000 T3 Y3
Stiens Werkzeugmaschinen GmbH
Mittelweg 92
D-59302 Oelde
Telefon: +49 (0) 2522 / 83 49 0
Fax: +49 (0) 2522 / 83 49 20
Email: info@stiens.de
Mittelweg 92
D-59302 Oelde
Telefon: +49 (0) 2522 / 83 49 0
Fax: +49 (0) 2522 / 83 49 20
Email: info@stiens.de
Details
| Stock number | 1039-9114 |
| Machine Category | CNC Turning- and Milling Center |
| Make | MORI SEIKI |
| Type | NZ 2000 T3 Y3 |
| Year | 2011 |
| Control | MSX 701 IV / MAPPS IV |
| Storage location | Nordrhein-Westfalen |
| Country of origin | Japan |
| Delivery time | to be agreed |
| Quotation | ex site |
| Other information | CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T3 Y3 - Main- and Subspindle - 3 turrets, 2 upper, 1 below - 3 Y-Axis - 3x 16 driven tool stations - only 9.443 operating hours - extensive accessory package |
More information
| turning diameter | max. 320mm |
| turning length | max. 810mm |
| control | MSX 701 IV / MAPPS IV |
| greates pass round over bed | 800mm |
| Swing dia. over traverse guideway | 800mm |
| distance between spindles | 1.130mm |
| standard turning dia. | 200mm |
| Main spindle: | |
| Number of revolutions | max. 5.000min/-1 |
| power capacity - main spindel | 25 / 22kW |
| max. Torque | 358Nm |
| spindle diameter in front bearing | 120mm |
| spindle bore | 73mm |
| Bar feed | max. 65mm |
| C-Axis | 0,001° |
| spindle nose | JIS A2-6 |
| Subspindel: | |
| Number of revolutions | max. 5.000min/-1 |
| power capacity - Sub spindle | 25 / 22kW |
| max. Torque | 358Nm |
| spindle diameter in front bearing | 120mm |
| spindle bore | 73mm |
| Bar feed | 65mm |
| C-Axis | 0,001° |
| spindle nose | JIS A2-6 |
| chucking diameter | 210mm |
| Turret 1: | |
| number of toolpositions | 16pos. |
| Number of driven toolspositions | 16pos. |
| Spindle speed - driven tool stations | max. 6.000min -1 |
| power capacity - driven tool-stations | 7,5 / 5,5kW |
| Y - Axis | 110 (+65 / -45)mm |
| Shank diameter | 20 x 20mm |
| Drill shank diameter | 32mm |
| turret change time | 0,18sec. |
| Turret 2: | |
| number of toolpositions | 16pos. |
| Number of driven toolspositions | 16pos. |
| Spindle speed - driven tool stations | max. 6.000min -1 |
| power capacity - driven tool-stations | 7,5 / 5,5kW |
| Y - Axis | 110 (+45 / -65)mm |
| Shank diameter | 20 x 20mm |
| Drill shank diameter | 32mm |
| turret change time | 0,18sec. |
| Turret 3: | |
| number of toolpositions | 16pos. |
| Number of driven toolspositions | 16pos. |
| Spindle speed - driven tool stations | max. 6.000min -1 |
| power capacity - driven tool-stations | 7,5 / 5,5kW |
| Y - Travel | 110 (+65 / -45)mm |
| Shank diameter | 20 x 20mm |
| Drill shank diameter | 32mm |
| turret change time | 0,18sec. |
| axis stroke: | |
| x-travel | 1/2/3: 210mm |
| y-travel | 1/2/3: 110mm |
| z-travel | 1: 300 (+100)mm |
| z-travel | 2: 810mm |
| z-travel | 3: 300 (+100)mm |
| Traverses Subspindle | 920mm |
| feeds: | |
| rapid traverse ( X / Y / Z ) | 1: 30 / 20 / 50m/min |
| rapid traverse ( X / Y / Z ) | 2: 30 / 16 / 50m/min |
| rapid traverse ( X / Y / Z ) | 3: 30 / 20 / 50m/min |
| Tipp feed | 0 - 5.000mm/min |
| total power requirement | 102kVA |
| weight of the machine ca. | 9,5t |
| dimensions of the machine ca. | 15,5 x 5,5 x 4,0m |
| Documents | |
| Chip conveyor | |
| Coolantsystem | |
| high pressure coolant | Knoll KF200/1400 70 bar |
| triple signal light | |
| C-axis | |
| Y-axis | |
| Subspindle | |
| Turret | 3x |
| gantry loader | Promot EPL20 NC |
| paper band filter | |
| tool holders | |
| driven tools | |
| tool setter | 2x |
| steady rest | SMW - SLU-1Z(on Turret) |
| exhaust fan | ELBARON - EBR 5000 D |